Setting Sleep timers

17 September, 2024

Sleep timers very handy feature that enables the user to stop all spa activity during certain times of day or night. While the controller is sleeping NO automatic heating or filtration maintenance will occur, however the spa can still be operated by manual use.

There are two individual sleep timers that can be set, each of which can operate on one or more specified weekdays. This enables the user to program different sleep times for different days (ie. weekdays vs weekends), as well as custom settings on a particular day/time where the user may want the spa silenced.

If you have a standard SV Mini 1, Mini 2, SV2T, SV3T or SV4T touchpad the sleep times are accessed via the Setup Menu.

If your spa is fitted with the colour screen iTouch the sleep timer are edited via the General settings menu

Each sleep time setting consists of a weekday setting, start time and stop time (refer table below).

Entering the Setup menu

The SV controllers feature an advanced setup menu which allows customisation of the adjustable controller settings.

Setup Menu

The SV controllers feature an advanced setup menu which allows customization of the adjustable controller settings. Menu item options are detailed in the list below.

To enter menu press and hold and buttons until [MODE]
is displayed.
Press or to navigate through menu item list
Press to enter menu item adjustment
Press or to adjust setting
Press to confirm setting and exit menu

Accessible options in the setup menu

Important Notes

The setup menu item settings are stored in non-volatile memory (EEPROM) and are remembered when power is turned off. No need to reprogram settings when power is restored.

A ten (10) second idle menu time out period exists. If a button press is not detected for 10 seconds, the menu will time out and the screen will return to the default display mode.